| Series |
Products covered |
| 150
- 299 |
HSS TWIST
DRILLS: to ISO 235 / BS328 / DIN standards - Made milled or precision
ground flutes / taper shank and parallel shank / stub length to very
long length / 0.2mm to 100mm (4") diameter / tapered drills / drills
with Titanium Nitride coating |
| 150M
- 200M |
SUPERCOBALT
TWIST DRILLS - Made from M42 8% Co AISI, and of heavy duty construction
/ also CARBIDE-TIPPED DRILLS |
| 400
- 448 |
HSS REAMERS - To
major international standards / hand and machine types / parallel or
taper shank / spiral flute or straight flute / short to very long /
tapered reamers |
| 520
- 628 |
HSS and
SUPERCOBALT END MILLS / SLOT DRILLS. 2, 3, and 4 fluted - Quality
ground for high production / TiN and TiCN coated types / with
cylindrical shanks / with screwed shanks for autolock and similar
threaded collets / with flatted "Weldon" shanks DIN1835B for the latest
generation of sidelock holders |
| 534
- 637 |
HSS and COBALT
CNC -Ground form cutters, again with threaded or flatted shanks - Wide
range of forms available - see our specialities
page |
| 555
- 557 |
COBALT THROWAWAY
CUTTERS (6mm and ΒΌ" shanks) -Both for, British (FC-3 type) holders and
DIN1835B sidelock holders / including BALL NOSE and COATED types |
| 655
- 656 |
SUPERCOBALT
RIPPING CUTTERS - "roughing" or "hogging" mills / threaded or flatted
shanks / superb CNC relief - ground forms / -NR -NF and -HR forms /
TiCN coated types / other coating on demand |
| 501
- 510 |
HSS side and
face Cutters / Slab mills / Shell mills / Angle Cutters |
| 517
- 518 |
HSS slitting
Saws / Side Chip Saws / metric and inch bores |
| 511
- 516 |
HSS Form -
Relieved Cutters (many shapes) for gears etc - see our specialities
page |
| 456
- 457 |
HSS Countersinks
60 degree / 90 degree / parallel shank or taper shank |
| T18
- T221 |
HSS Hardened +
Ground TOOLBITS - DIN4964 shapes A/B/D/E- Round, square, rectangular,
trapezoidal - / supercobalt grades |
| TCSC
- THSG |
Taps and Dies
for Threading in Unified, ISO Metric, Whitworth, Cycle, Brass, and many
pipe thread forms |
| 760
- 802 |
Blades for
hacksaw machines / holesaws / accessories |
| A
SERIES |
Drill Sleeves /
Extension Sockets / also Mandrels / Tape wrenches / Die stocks. |
