| Series | Products covered |
| 150 - 299 | HSS TWIST DRILLS: to ISO 235 / BS328 / DIN standards - Made milled or precision ground flutes / taper shank and parallel shank / stub length to very long length / 0.2mm to 100mm (4") diameter / tapered drills / drills with Titanium Nitride coating |
| 150M - 200M | SUPERCOBALT TWIST DRILLS - Made from M42 8% Co AISI, and of heavy duty construction / also CARBIDE-TIPPED DRILLS |
| 400 - 448 | HSS REAMERS - To major international standards / hand and machine types / parallel or taper shank / spiral flute or straight flute / short to very long / tapered reamers |
| 520 - 628 | HSS and SUPERCOBALT END MILLS / SLOT DRILLS. 2, 3, and 4 fluted - Quality ground for high production / TiN and TiCN coated types / with cylindrical shanks / with screwed shanks for autolock and similar threaded collets / with flatted "Weldon" shanks DIN1835B for the latest generation of sidelock holders |
| 534 - 637 | HSS and COBALT CNC -Ground form cutters, again with threaded or flatted shanks - Wide range of forms available - see our specialities page |
| 555 - 557 | COBALT THROWAWAY CUTTERS (6mm and ¼" shanks) -Both for, British (FC-3 type) holders and DIN1835B sidelock holders / including BALL NOSE and COATED types |
| 655 - 656 | SUPERCOBALT RIPPING CUTTERS - "roughing" or "hogging" mills / threaded or flatted shanks / superb CNC relief - ground forms / -NR -NF and -HR forms / TiCN coated types / other coating on demand |
| 501 - 510 | HSS side and face Cutters / Slab mills / Shell mills / Angle Cutters |
| 517 - 518 | HSS slitting Saws / Side Chip Saws / metric and inch bores |
| 511 - 516 | HSS Form - Relieved Cutters (many shapes) for gears etc -
see our specialities page |
| 456 - 457 | HSS Countersinks 60 degree / 90 degree / parallel shank or taper shank |
| T18 - T221 | HSS Hardened + Ground TOOLBITS - DIN4964 shapes A/B/D/E- Round, square, rectangular, trapezoidal - / supercobalt grades |
| TCSC - THSG | Taps and Dies for Threading in Unified, ISO Metric, Whitworth, Cycle, Brass, and many pipe thread forms |
| 760 - 802 | Blades for hacksaw machines / holesaws / accessories |
| A SERIES | Drill Sleeves / Extension Sockets / also Mandrels / Tape wrenches / Die stocks. |